Trailer Axle Beam with Easy Grease Spindles – 4″ Drop – 89″ Long – 3,500 lbs

Description

 Trailer Axles

Round trailer axle beam measures 89″ from hub-face-to-hub-face (when hubs – sold separately – are mounted) and 74″ from spring-center-to-spring-center. Easy Grease spindles make it easy to lubricate bearings (sold separately).

Features:

• Round axle beam acts as part of your trailer’s suspension system
  • Replace an axle on your trailer
  • Fabricate a suspension to fit your application
• High-strength steel construction
• Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer’s tires
  • Best for straight-line acceleration and steady, controlled towing
• Underslung design – spring seats welded to underside of axle for mounting leaf springs (sold separately)
• 4″ Drop, Easy Grease spindles
  • Lowered axle beam provides lower deck height for easier loading and unloading
  • Patented welding process prevents spindle failure with 40% stronger welds
  • Built-in grease zerk for simple lubrication
• Spring seats and spindles are welded on
• CSA, QAI, and SAE-N certified
• Lifetime technical support from the experts at etrailer.com
• Made in the USA

Specs:

• Weight capacity: 3,500 lbs
• Hub-face-to-hub-face length: 89″
• Spring-center-to-spring-center length: 74″
• Axle diameter: 2-3/8″
• Spindle drop: 4″
• Spindle/hub compatibility:
  • Bearings: L68149 inner, L44649 outer
  • Seal: 58846, inner diameter 1.719″
• Limited lifetime warranty

Axle Dimensions

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

If you are replacing your trailer’s axle, you should be able to figure out which type you need by determining your trailer’s capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.